 |
Product
No -
CA18 & SR20
Fitting Kits
Are you in Adelaide and would like to do this conversion? This is a current project on the go. If you would like us to fit it for you please enquire. Not currently available for other states. |
TBA
|
|
Product No - SWB1200
120Y Conversion Sway Bar Kit
Adjustable 22mm swaybar with D-bushes,saddles & link ends. Suitable for CA, SR or other conversion. |
$299 |
 |
Product
No - URCP
Ultimate Race Coilover Package
Shortened 200B or Stanza struts (cut and re-threaded, not welded), KYB inserts, Adjustable Coilover Kit fitted with 65mm, 250lb King springs. Billet aluminium adjustable camber top. |
$1390
|
 |
Product
No - MD036
Lowered Front Strut Assembly
(pair)
Shortened 200B struts fitted with KYB inserts, 250lb lowered
front springs & strut savers. Picture is not accurate, springs are black.
|
$625
|
 |
Product No - ACK1200
Caster Adjuster Bar Kit (120Y)
To suit 120Y with 200B or Stanza strut upgrade |
$220 |
 |
Product
No - MD064
120Y Adjustable Front
(Lower Control) Arms
To suit 120Y with 200B or Stanza strut upgrade. Increase wheel track or camber angles by fitting these. Tig-welded with plenty of adjustment available. New polyeurethane bushes. |
$400
|
|
Product
No - BK120Y
New Bush Kit Suit 120Y
Front Lower Control Arm - Inner $43
Front Idler Arm $13
Front Strut Bar to Chassis Mount $35
Front Sway Bar Link Bush Kit $21
Front Sway Bar Mount to Chassis $16
Rear Shock Absorber Upper/Lower $15
Rear Spring Front Eye $39
(note minimum freight charge is $8.80) |
$165
|
 |
Product
No - FBK001
Front
Brake Conversion Kit
Includes 280mm slotted disc rotors, RX7 S4
Calipers
(new seal kits fitted), adaptor brackets, bolts, washers. wheel bearing kits, RDA approved braided hoses. Kit is designed to fit 200B or late Stanza struts. Will not affect wheel off-set. Comes wtih engineers report. Needs min 15" wheels |
$1410
|
 |
Product
No - MD072
CA18/120Y
Conversion Kit
Brake Booster
/ Master / Bracket / Clutch
Simplifies converting the clutch from cable
to hydraulic operation. Alloy mounting bracket
fits to firewall. MD072 package & MD074
kit then bolt up to the bracket. Fitment takes
around 1.5 - 2 hours. |
$700
|
|
Product
No -
Intercooler & Radiator
Custom-Built to suit CA/SR conversions. Hi-flow radiator is aluminium 2 x 26m core, 350 x 645 x 32. Fitted with 1 x 14" fan and boss sensor. Intercooler is 500 x 300 x 68mm shaped for ultimate air flow with 90 degree inlet/outlet bends. Highly polished finish. Ultimate setup designed for track or street. |
$1,995
|
 |
Product
No -
Diff Conversion & Rear Disc Brakes
Shortened R31 28 spline LSD. Rebuilt calipers, new wheel bearings, new seals, new U-bolts, new discs, new pads. Includes hand brake cables and brake lines. Shortened to your specifications. Price is for standard LSD 3.7:1 ratio and standard centre, other options available.
|
$2,450
|
 |
Product
No - FS120Y
Boot-Fit Fuel Package
Designed to mount to side of interior boot. Includes aluminium surge tank, lift pump, Bosch EFI pump, low pressure filter, high pressure filter, clamps & hoses. Pumps are fixed on a rubber mounted aluminium plate. |
$700
|
 |
Product No - SB1200
Strut Brace (120Y)
Increase engine bay rigidity. Powdercoated ends and polished aluminium bar. |
$180 |
 |
Product
No - MD066
SR20/120Y Accelerator
Cable
A straight bolt in fit when converting your
1200 to CA18 motor. |
$85
|
|
Product
No - MD066
CA18/120Y Accelerator
Cable
A straight bolt in fit when converting your
1200 to CA18 motor. |
$85
|
 |
Product
No - MD078
CA18/120Y Speedo
Cable
|
$95
|
|
BACK
TO TOP
