Product No - Upgrade
Brake Upgrade Options
All brake kits come with standard rotors and new rubber lines (regardless of images shown). The below options apply to most kits.

Slotted Rotors $100
Slotted & Dimpled Rotors $205
ADR approved braided S/S lines $45
Custom PCD for ally hub kits $100
Calipers are black unless requested otherwise. No additional charge for different colour (eg red).

 

Product No - FBK200B
Front Brake Conversion Kit 200B
Includes 200B rotors, 200B Calipers (new seal kits fitted), bolts, washers. wheel bearing kits, new rubber lines. 4 stud 114.3 PCD. Recommended for smaller engine conversions eg A15 into 1200.

$870
unavailable

Product No - FBK1000
Datsun 1000 Front Brake Kit
256mm disc, reconditioned VN Caliper, new rubber lines, mounting brackets and everything you need to bolt this straight on. Will fit under most 14" mag wheels and some 13"..

$995

Product No - FBK004
Front Brake Conversion Kit Commo
Includes 276mm vented disc rotors, V8 Commodore Calipers (new seal kits fitted), adaptor brackets, bolts, washers. wheel bearing kits, new rubber lines. Kit is designed to fit 180B struts with minimum 15" wheels. 4 stud 114.3 PCD. Suitable for a high powered non-turbo engine.

$925

Product No - FBK005
Front Brake Conversion Kit Nissan
Bolt on kit Includes 276mm vented disc rotors, R32 GTST Calipers (new seal kits fitted), adaptor brackets, bolts, washers, new wheel bearings, new rubber lines. Kit is designed to fit R31 struts on a Datsun with minimum 15" wheels. 4 stud 114.3 PCD.

$1,295

Product No - FBK007
Front Brake Conversion Kit Nissan
Bolt on kit Includes 276mm vented disc rotors, R32 GTST Calipers (new seal kits fitted), custom billet aluminium anodised hub, adaptor brackets, bolts, washers, new wheel bearings, new rubber lines. Kit is designed to fit 200B/Stanza struts on a Datsun with minimum 15" wheels. Standard hub 4 stud 114.3 PCD.

$1,415

Product No - FBK001
Front Brake Conversion Kit Mazda
Includes 276mm vented disc rotors, RX7 S4 Calipers (new seal kits fitted), adaptor brackets, bolts, washers. wheel bearing kits, new rubber lines. Kit is designed to fit 200B or late Stanza struts with minimum 15" wheels. Comes wtih engineers report. 4 stud 114.3 PCD. Suitable for track or street with a high powered turbo engine. MOST POPULAR.

$1,265

Product No - FBK003
Front Brake Conversion Kit Ally Hub
As above but with custom billet aluminium anodised hub. Choice of 4 or 5 stud 114.3 PCD. This brake package, combined with our ultimate coilover is the lightest 4-spot brake and strut kit on the market at 20.5kg per side. Similar application to FBK001, but lighter weight and choice of stud-pattern.

$1,415

Product No - FBK006
Front Brake Kit suit Front Runner's
Bolt on kit Includes 296mm vented disc rotors, Series 6 RX7 Calipers (new seal kits fitted), adaptor brackets, bolts, washers, new wheel bearings, new rubber lines. Kit is designed to fit 200B/Stanza struts on a Datsun with 4 stud 114.3 PCD Weld & Centreline ' Front Runner' 15 x 4" Wheels. Contact us regarding wheel offset.

$1,950

Product No - FBK002
Front Brake Conversion Kit Ultimate
Includes 296mm vented disc rotors, RX7 S6 Calipers (new seal kits fitted), adaptor brackets, bolts, washers. wheel bearing kits, new rubber lines and light-weight aluminium anodised hubs. Kit is designed to fit 200B or late Stanza struts with minimum 16" wheels. 4 or 5 stud 114.3 PCD. This is suitable for the heavier Datsun at the track. Bigger is not always better, please ask us if this kit is suitable for you.

$1,950

Product No - FBK008
Front Brake Ultra Light Drag Kit
Includes light weight Willwood rotors, twin piston Willwood calipers, performance pads, billet aluminium hub and Willwood rotor hat, braided s/s brake lines and wheel bearings. Total weight with URCP strut 14kg per side! Available 4 or 5-stud. Suit most Front Runner wheels. This kit is NOT street legal and is designed for the serious racer, not for street. Fit 200B or late Stanza struts. Call for more information. *Price is subject to change.

$1,950*
Product No - RBCK
1600 Rear Brake Conversion Kit
Includes rotors, rebuilt calipers, brackets, hoses and lines and handbrake cable set. Will fit Datsun 1600/180B. Bolt on, no welding required. Comes with engineers report.
$1,125
 

STILL DON'T SEE WHAT YOU WANT? ASK US AND WE MAY BE ABLE TO FIND A SOLUTION FOR YOU.
LOOKING FOR A STRUT AND BRAKE PACKAGE? CHECK OUT THE PACKAGES PAGE.

 
Product No - MD019
Front Flex Hose  (conversion)
Replacement hoses for brake kit MD017.
$95
Product No - MD020
Lucas Brake Pads  
Suit Mazda Caliper
$82
Product No - MD021
EBC Greenstuff Pads  
Suit Mazda Caliper. Road or race for light-weight cars under 750kg. Low dust.
$250
Product No - RBLK
R31 Rear Line/Hose Kit
Rear line hose kit (included in RBCK).
$100
Product No - MD024
R31/1600 Handbrake Cables
Handbrake cables as per RBCK kit.
$240
Product No - RBKCB
R31/1600 Caliper Brackets
Conversion brackets to fit R31 brakes to your Datsun 1600/180B.
$160
Product No - MD026
Rear Replacement Pads
Suit R31/1600 Kit
$57
Product No - MC7/8
7/8 Brake Master Cylinder
Use when upgrading to 4-pot calipers.
$145
Product No - MC13/16
13/16 Brake Master Cylinder
Replacement for Datsun 180B. Will fit 180B booster.
$180
Product No - MC1IN
1" Brake Master Cylinder
Suitable for other manufacturers kits. Not recommended for Mad Dat kit.
$160
Product No - BBK1600
1600 Brake Booster/Master
New small-can brake booster fitted with 7/8 master cylinder. Polished alloy brackets supplied. Will fit other applications.
$420
Product No - BBK1200
Brake Booster / Master / Bracket / Clutch
Includes BBK bracket, new small can brake booster, 7/8 master cylinder, hydraulic clutch kit, new clutch pedal and rubber, and one way check valve. Simplifies converting the clutch from cable to hydraulic operation. Suitable for all conversions where clutch conversion required, eg CA18 or SR20 into 1200.
$780

Product No - CP1200HD
Heavy Duty Clutch Pedal
Included in above kit. Required when installing heavy duty clutch to avoid bending of old pedal. Includes new rubber pad and bushes. Item is designed to suit Mad Dat Kit.

$80
Product No - BBK
1200 Brake Bracket
Basic bracket as supplied in BBK1200 kit for those wanting to use their own booster/master etc Adds strength to the firewall. Required for most RTA inspections when additing a booster to a 1200 that was not previously boosted.
$125
Product No - HCK
Hydraulic Clutch Kit
Kit consists of short travel clutch master cylinder, slave cylinder & braided flex line, as well as banjo bolt/washer set & rose joint fitting (needs to be attached to clutch pedal). Instructions included. Various options available.
$180
Product No - CRRK
Remote Clutch Reservoir Relocation Kit
Designed for SR20 into 1200 where the engine is too tight to fit clutch reservoir in standard position next to brake master. Includes quality Speed Flow fittings and rubber hose. Does not come with reservoir or master. Designed for use with HCK
$100
Product No - CLCA18
CA18 Clutch Kit
Xtreme Heavy Duty Organic Clutch. 800kg Clamp Load -approx 60% over standard dampened hub with cushioned organic facings.
Also available in Cushioned ceramic $560, solid ceramic HD $380, solid ceramic extra HD $710. Flywheel's available.$405
$305
Product No - CLSR20S13
SR20 Clutch Kit S13/14
Xtreme Heavy Duty Organic Clutch. 800kg Clamp Load -approx 35% over standard dampened hub with cushioned organic facings.
Also available in Cushioned ceramic, solid ceramic HD, solid ceramic extra HD. Flywheel's available.
$324
Product No - CLS15
SR20 Clutch Kit S15
Xtreme Heavy Duty Organic Clutch (includes fly wheel). 800kg Clamp Load -approx 35% over standard rigid hub with cushioned organic facings. Also available in Cushioned ceramic $590, solid ceramic HD $530, solid ceramic extra HD $825 and drift specials.
$1,087
Product No - CLFJ20
FJ20 Clutch Kit
Xtreme Heavy Duty Organic Clutch. 850kg Clamp Load -approx 25% over standard (For Turbo Skyline) with cushioned organic facings. Also available in Cushioned ceramic and solid ceramic. Flywheel's available.
$324

Product No - CL13B
Mazda 13B Clutch Kit
Xtreme Heavy Duty Organic Clutch. 850kg Clamp Load -approx 30% over standard dampened hub with cushioned organic facings. Also available:

Cushioned Ceramic $766
Solid Ceramic HD $683
XHD Solid Ceramic (double clamp load) $785

$477
Product No - CLA15
A15 Clutch Kit
Xtreme Heavy Duty Organic Clutch. 485kg Clamp Load -approx 40% over standard dampened hub with cushioned organic facings. Also available in solid ceramic.
$190
xtremeclutch
Many more options available. For more information, give us a call or visit www.xtremeclutch.com.au Mad Dat images may not represent actual product, please check Xtreme website.
 
BACK TO TOP  
©2012 MAD DAT MOTORSPORT   l   MERCHANDISE   l   ORDER   l   CONTACT